Show notes
Feedback:
FPV Help
-- William B.
"KITAs,
I am excited that you have brought drones back to Know How! I watched when you did drones in 2015, but only recently have I been getting very much into designing and building my own. I started with the trainer you suggested and have graduated to 250 and 450 class quads, but now I want FPV.
I've been looking at some options and they all look either too expensive or too complicated. I'm not sure if I want goggles, because I actually like to SEE my drone in addition to being able to see FROM the drone. What are my options and what would you suggest for a budget of ~$200?"
- Allow me to interface a receiver with my PROPERLY Equipped Android phone or tablet
- 5.8 Ghz (so it won't crowd the already crowded 2.4Ghz spectrum
- THIS WON'T WORK ON ALL DEVICES!
- Must support OTG (On The Go)
- Must support UVC (USB Video Class)
- 5.8Ghz (40 Channels)
- 3 Output power levels (25/200/600MW)
- Can transmit audio AND video
- 7-24 Volts
- 5.8Ghz
- 48 channels
- 5.8Ghz
- 25mw
- Combines a camera with a transmitter/antenna
- Can run on 3.3-5v (Can be run on a single LiPo)
- Diversity Antennas
- Front-Facing Camera
The STL files for the FPV Mount are at the link below:
Exercises
- Hovering above the ground effect
- Nose Out
- Circle of Death
- Nose In
What you get in the box:
- ROVA Drone
- 2 x 2s (7.4v) 1200mAh battery
- USB Charger
- Carrying Case
- 16GB SD Card
What is it?
- a phone-controlled drone (iOS or Android)
- Connects via WiFi (Password 00000000)
- 8 Minutes of flight
- Forward-Facing Camera + Downward facing camera (12MP/5MP)
These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/368
Hosts: Fr. Robert Ballecer, SJ and Jason Howell
Sponsor:
Watch Video
